Main content | back to top
Shell Helix Diesel HX5 K
Reduced noise for engines with more than 100,000km
- Thicker oil that contains extra anti-wear agents
Shell Helix Diesel HX5 K has 30% more anti-wear agent than Shell Helix Diesel HX5.
- Special Active Cleansing Technology
Works harder than ordinary oils by continuously preventing soot build-up.
- Better protection thanks to higher viscosity
Up to 27% higher viscosity than Shell Helix Diesel HX5.
A cleaner, more efficient engine
Well-travelled engines can be prone to greater wear and higher oil consumption, which can lead to reduced performance and premature failure. Cleaner engines can operate more efficiently. Efficient engines are likely to feel smoother and be quieter.
Shell Helix Diesel HX5 K is thicker than ordinary oils, which helps to reduce oil leaks. It also contains 30% more anti-wear chemical than Shell Helix Diesel HX5 to provide the extra protection that well-travelled engines may need.
It also uses special Active Cleansing Technology to help diesel engines to operate efficiently for a smoother and quieter drive. Soot from diesel combustion can increase an oil’s viscosity, which forces the engine to work harder.
Shell Helix Diesel HX5 K removes soot from surfaces and reduces the rate of further soot build-up. The oil cleans the engine and continues to flow quickly, so that the engine operates efficiently and smoothly. In independent tests, engine vibration was reduced after a Shell Helix Diesel HX5 K oil change.
The oil in a clean engine can flow more quickly to where it is needed and has improved access to surfaces, so that the engine is better protected and lasts longer. Shell Helix Diesel HX5 K goes on delivering its benefits throughout the oil-change interval.
Shell Helix Diesel HX5 K is specifically formulated for naturally aspirated or turbocharged, indirect-injection diesel engines that have been driven more than 100,000 km and are fitted with blow-by-gas recirculation. It meets vehicle manufacturers’ specifications.
Proven cleansing technology
Soot and sludge can build up in diesel engines, and reduce engine performance and prevent the oil from protecting the engine components. In tests at an independent laboratory, Shell Helix Diesel HX5 K oil removed the sludge from a diesel engine. The engine was run with a mineral motor oil for a typical oil-change interval, and soot deposits built up.
The oil was then replaced with Shell Helix Diesel HX5 K, and the engine was run again for a similar period. An immediate clean-up effect was seen with Shell Helix Diesel HX5 K, and, although it contained soot from the previous oil, the Shell Helix Diesel HX5 K was able to reduce the rate of soot deposit build-up by up to five times compared with the original oil.
Reduce engine vibration by up to 7.9%
Clean engines run more smoothly. Engine vibration tests show that engine vibration was reduced by up to 6.8% after a Shell Helix Diesel HX5 K oil change, with the oil filled to the same low level. Engine vibration was reduced by up to 7.9% when the engine was topped up to the maximum level with Shell Helix Diesel HX5 K compared with when the engine was run with a normal oil at the minimum level, as might be the case before an oil change.
Shell Helix tests
To clean and protect an engine, the oil must continue to perform until it is removed when the car is serviced. With some manufacturers recommending longer service intervals, an oil’s ability to stay fit is even more important. Throughout the oil’s life, it has to disperse more and more dirt – keeping it locked away and preventing it from being redeposited in the engine.
Our scientists perform a variety of tests that measure the ability of Shell Helix oils to resist breakdown and disperse dirt. We also test our competitors’ oils, so that we can benchmark our lubricants and demonstrate the benefits of using Shell Helix oils.
Why you should use Shell Helix Diesel HX5 K:
- Helps to reduce wear and oil consumption, and maintains cylinder compression.
- Works harder to protect than ordinary motor oils by continuously preventing soot build-up.
- Resists oil degradation throughout the oil-change interval.
- Reduces oil volatility and therefore oil consumption.
- Smoother, quieter drive.
Specifications and approvals
Because lubricants vary in quality, universal criteria are used to describe oil performance and usage. Shell Helix motor oils not only meet these increasingly demanding international specifications but usually surpass them. Shell Helix Diesel HX5 K exceeds these specifications: API CF; ACEA A2/B2.
Compared with a normal mineral oil (API SG/CD)